/*
//-----------------------------------------------------------------------------
//   File:      FX2regs.h
//   Contents:   EZ-USB FX2 register declarations and bit mask definitions.
//
// $Archive: /USB/Target/Inc/fx2regs.h $
// $Date: 2005/07/20 16:23:46 $
// $Revision: 1.2 $
//
//
//   Copyright (c) 2000 Cypress Semiconductor, All rights reserved
//-----------------------------------------------------------------------------
*/

#ifndef FX2REGS_H   /* Header Sentry */
#define FX2REGS_H

/*
//-----------------------------------------------------------------------------
// FX2 Related Register Assignments
//-----------------------------------------------------------------------------

// The Ez-USB FX2 registers are defined here. We use FX2regs.h for register 
// address allocation by using "#define ALLOCATE_EXTERN". 
// When using "#define ALLOCATE_EXTERN", you get (for instance): 
// xdata volatile BYTE OUT7BUF[64]   _at_   0x7B40;
// Such lines are created from FX2.h by using the preprocessor. 
// Incidently, these lines will not generate any space in the resulting hex 
// file; they just bind the symbols to the addresses for compilation. 
// You just need to put "#define ALLOCATE_EXTERN" in your main program file; 
// i.e. fw.c or a stand-alone C source file. 
// Without "#define ALLOCATE_EXTERN", you just get the external reference: 
// extern xdata volatile BYTE OUT7BUF[64]   ;//   0x7B40;
// This uses the concatenation operator "##" to insert a comment "//" 
// to cut off the end of the line, "_at_   0x7B40;", which is not wanted.
*/

#define ALLOCATE_EXTERN

#ifdef ALLOCATE_EXTERN
#define EXTERN
#define _AT_(a) at a
#else
#define EXTERN extern
#define _AT_ ;/ ## /
#endif

typedef unsigned char BYTE;
typedef unsigned short WORD;

EXTERN xdata _AT_(0xE400) volatile BYTE GPIF_WAVE_DATA    ;
EXTERN xdata _AT_(0xE480) volatile BYTE RES_WAVEDATA_END  ;

// General Configuration

EXTERN xdata _AT_(0xE600) volatile BYTE CPUCS             ;  // Control & Status
EXTERN xdata _AT_(0xE601) volatile BYTE IFCONFIG          ;  // Interface Configuration
EXTERN xdata _AT_(0xE602) volatile BYTE PINFLAGSAB        ;  // FIFO FLAGA and FLAGB Assignments
EXTERN xdata _AT_(0xE603) volatile BYTE PINFLAGSCD        ;  // FIFO FLAGC and FLAGD Assignments
EXTERN xdata _AT_(0xE604) volatile BYTE FIFORESET         ;  // Restore FIFOS to default state
EXTERN xdata _AT_(0xE605) volatile BYTE BREAKPT           ;  // Breakpoint
EXTERN xdata _AT_(0xE606) volatile BYTE BPADDRH           ;  // Breakpoint Address H
EXTERN xdata _AT_(0xE607) volatile BYTE BPADDRL           ;  // Breakpoint Address L
EXTERN xdata _AT_(0xE608) volatile BYTE UART230           ;  // 230 Kbaud clock for T0,T1,T2
EXTERN xdata _AT_(0xE609) volatile BYTE FIFOPINPOLAR      ;  // FIFO polarities
EXTERN xdata _AT_(0xE60A) volatile BYTE REVID             ;  // Chip Revision
EXTERN xdata _AT_(0xE60B) volatile BYTE REVCTL            ;  // Chip Revision Control

// Endpoint Configuration

EXTERN xdata _AT_(0xE610) volatile BYTE EP1OUTCFG         ;  // Endpoint 1-OUT Configuration
EXTERN xdata _AT_(0xE611) volatile BYTE EP1INCFG          ;  // Endpoint 1-IN Configuration
EXTERN xdata _AT_(0xE612) volatile BYTE EP2CFG            ;  // Endpoint 2 Configuration
EXTERN xdata _AT_(0xE613) volatile BYTE EP4CFG            ;  // Endpoint 4 Configuration
EXTERN xdata _AT_(0xE614) volatile BYTE EP6CFG            ;  // Endpoint 6 Configuration
EXTERN xdata _AT_(0xE615) volatile BYTE EP8CFG            ;  // Endpoint 8 Configuration
EXTERN xdata _AT_(0xE618) volatile BYTE EP2FIFOCFG        ;  // Endpoint 2 FIFO configuration
EXTERN xdata _AT_(0xE619) volatile BYTE EP4FIFOCFG        ;  // Endpoint 4 FIFO configuration
EXTERN xdata _AT_(0xE61A) volatile BYTE EP6FIFOCFG        ;  // Endpoint 6 FIFO configuration
EXTERN xdata _AT_(0xE61B) volatile BYTE EP8FIFOCFG        ;  // Endpoint 8 FIFO configuration
EXTERN xdata _AT_(0xE620) volatile BYTE EP2AUTOINLENH     ;  // Endpoint 2 Packet Length H (IN only)
EXTERN xdata _AT_(0xE621) volatile BYTE EP2AUTOINLENL     ;  // Endpoint 2 Packet Length L (IN only)
EXTERN xdata _AT_(0xE622) volatile BYTE EP4AUTOINLENH     ;  // Endpoint 4 Packet Length H (IN only)
EXTERN xdata _AT_(0xE623) volatile BYTE EP4AUTOINLENL     ;  // Endpoint 4 Packet Length L (IN only)
EXTERN xdata _AT_(0xE624) volatile BYTE EP6AUTOINLENH     ;  // Endpoint 6 Packet Length H (IN only)
EXTERN xdata _AT_(0xE625) volatile BYTE EP6AUTOINLENL     ;  // Endpoint 6 Packet Length L (IN only)
EXTERN xdata _AT_(0xE626) volatile BYTE EP8AUTOINLENH     ;  // Endpoint 8 Packet Length H (IN only)
EXTERN xdata _AT_(0xE627) volatile BYTE EP8AUTOINLENL     ;  // Endpoint 8 Packet Length L (IN only)
EXTERN xdata _AT_(0xE630) volatile BYTE EP2FIFOPFH        ;  // EP2 Programmable Flag trigger H
EXTERN xdata _AT_(0xE631) volatile BYTE EP2FIFOPFL        ;  // EP2 Programmable Flag trigger L
EXTERN xdata _AT_(0xE632) volatile BYTE EP4FIFOPFH        ;  // EP4 Programmable Flag trigger H
EXTERN xdata _AT_(0xE633) volatile BYTE EP4FIFOPFL        ;  // EP4 Programmable Flag trigger L
EXTERN xdata _AT_(0xE634) volatile BYTE EP6FIFOPFH        ;  // EP6 Programmable Flag trigger H
EXTERN xdata _AT_(0xE635) volatile BYTE EP6FIFOPFL        ;  // EP6 Programmable Flag trigger L
EXTERN xdata _AT_(0xE636) volatile BYTE EP8FIFOPFH        ;  // EP8 Programmable Flag trigger H
EXTERN xdata _AT_(0xE637) volatile BYTE EP8FIFOPFL        ;  // EP8 Programmable Flag trigger L
EXTERN xdata _AT_(0xE640) volatile BYTE EP2ISOINPKTS      ;  // EP2 (if ISO) IN Packets per frame (1-3)
EXTERN xdata _AT_(0xE641) volatile BYTE EP4ISOINPKTS      ;  // EP4 (if ISO) IN Packets per frame (1-3)
EXTERN xdata _AT_(0xE642) volatile BYTE EP6ISOINPKTS      ;  // EP6 (if ISO) IN Packets per frame (1-3)
EXTERN xdata _AT_(0xE643) volatile BYTE EP8ISOINPKTS      ;  // EP8 (if ISO) IN Packets per frame (1-3)
EXTERN xdata _AT_(0xE648) volatile BYTE INPKTEND          ;  // Force IN Packet End
EXTERN xdata _AT_(0xE649) volatile BYTE OUTPKTEND         ;  // Force OUT Packet End

// Interrupts

EXTERN xdata _AT_(0xE650) volatile BYTE EP2FIFOIE         ;  // Endpoint 2 Flag Interrupt Enable
EXTERN xdata _AT_(0xE651) volatile BYTE EP2FIFOIRQ        ;  // Endpoint 2 Flag Interrupt Request
EXTERN xdata _AT_(0xE652) volatile BYTE EP4FIFOIE         ;  // Endpoint 4 Flag Interrupt Enable
EXTERN xdata _AT_(0xE653) volatile BYTE EP4FIFOIRQ        ;  // Endpoint 4 Flag Interrupt Request
EXTERN xdata _AT_(0xE654) volatile BYTE EP6FIFOIE         ;  // Endpoint 6 Flag Interrupt Enable
EXTERN xdata _AT_(0xE655) volatile BYTE EP6FIFOIRQ        ;  // Endpoint 6 Flag Interrupt Request
EXTERN xdata _AT_(0xE656) volatile BYTE EP8FIFOIE         ;  // Endpoint 8 Flag Interrupt Enable
EXTERN xdata _AT_(0xE657) volatile BYTE EP8FIFOIRQ        ;  // Endpoint 8 Flag Interrupt Request
EXTERN xdata _AT_(0xE658) volatile BYTE IBNIE             ;  // IN-BULK-NAK Interrupt Enable
EXTERN xdata _AT_(0xE659) volatile BYTE IBNIRQ            ;  // IN-BULK-NAK interrupt Request
EXTERN xdata _AT_(0xE65A) volatile BYTE NAKIE             ;  // Endpoint Ping NAK interrupt Enable
EXTERN xdata _AT_(0xE65B) volatile BYTE NAKIRQ            ;  // Endpoint Ping NAK interrupt Request
EXTERN xdata _AT_(0xE65C) volatile BYTE USBIE             ;  // USB Int Enables
EXTERN xdata _AT_(0xE65D) volatile BYTE USBIRQ            ;  // USB Interrupt Requests
EXTERN xdata _AT_(0xE65E) volatile BYTE EPIE              ;  // Endpoint Interrupt Enables
EXTERN xdata _AT_(0xE65F) volatile BYTE EPIRQ             ;  // Endpoint Interrupt Requests
EXTERN xdata _AT_(0xE660) volatile BYTE GPIFIE            ;  // GPIF Interrupt Enable
EXTERN xdata _AT_(0xE661) volatile BYTE GPIFIRQ           ;  // GPIF Interrupt Request
EXTERN xdata _AT_(0xE662) volatile BYTE USBERRIE          ;  // USB Error Interrupt Enables
EXTERN xdata _AT_(0xE663) volatile BYTE USBERRIRQ         ;  // USB Error Interrupt Requests
EXTERN xdata _AT_(0xE664) volatile BYTE ERRCNTLIM         ;  // USB Error counter and limit
EXTERN xdata _AT_(0xE665) volatile BYTE CLRERRCNT         ;  // Clear Error Counter EC[3..0]
EXTERN xdata _AT_(0xE666) volatile BYTE INT2IVEC          ;  // Interupt 2 (USB) Autovector
EXTERN xdata _AT_(0xE667) volatile BYTE INT4IVEC          ;  // Interupt 4 (FIFOS & GPIF) Autovector
EXTERN xdata _AT_(0xE668) volatile BYTE INTSETUP          ;  // Interrupt 2&4 Setup

// Input/Output

EXTERN xdata _AT_(0xE670) volatile BYTE PORTACFG          ;  // I/O PORTA Alternate Configuration
EXTERN xdata _AT_(0xE671) volatile BYTE PORTCCFG          ;  // I/O PORTC Alternate Configuration
EXTERN xdata _AT_(0xE672) volatile BYTE PORTECFG          ;  // I/O PORTE Alternate Configuration
EXTERN xdata _AT_(0xE678) volatile BYTE I2CS              ;  // Control & Status
EXTERN xdata _AT_(0xE679) volatile BYTE I2DAT             ;  // Data
EXTERN xdata _AT_(0xE67A) volatile BYTE I2CTL             ;  // I2C Control
EXTERN xdata _AT_(0xE67B) volatile BYTE XAUTODAT1         ;  // Autoptr1 MOVX access
EXTERN xdata _AT_(0xE67C) volatile BYTE XAUTODAT2         ;  // Autoptr2 MOVX access

#define EXTAUTODAT1 XAUTODAT1
#define EXTAUTODAT2 XAUTODAT2

// USB Control

EXTERN xdata _AT_(0xE680) volatile BYTE USBCS             ;  // USB Control & Status
EXTERN xdata _AT_(0xE681) volatile BYTE SUSPEND           ;  // Put chip into suspend
EXTERN xdata _AT_(0xE682) volatile BYTE WAKEUPCS          ;  // Wakeup source and polarity
EXTERN xdata _AT_(0xE683) volatile BYTE TOGCTL            ;  // Toggle Control
EXTERN xdata _AT_(0xE684) volatile BYTE USBFRAMEH         ;  // USB Frame count H
EXTERN xdata _AT_(0xE685) volatile BYTE USBFRAMEL         ;  // USB Frame count L
EXTERN xdata _AT_(0xE686) volatile BYTE MICROFRAME        ;  // Microframe count, 0-7
EXTERN xdata _AT_(0xE687) volatile BYTE FNADDR            ;  // USB Function address

// Endpoints

EXTERN xdata _AT_(0xE68A) volatile BYTE EP0BCH            ;  // Endpoint 0 Byte Count H
EXTERN xdata _AT_(0xE68B) volatile BYTE EP0BCL            ;  // Endpoint 0 Byte Count L
EXTERN xdata _AT_(0xE68D) volatile BYTE EP1OUTBC          ;  // Endpoint 1 OUT Byte Count
EXTERN xdata _AT_(0xE68F) volatile BYTE EP1INBC           ;  // Endpoint 1 IN Byte Count
EXTERN xdata _AT_(0xE690) volatile BYTE EP2BCH            ;  // Endpoint 2 Byte Count H
EXTERN xdata _AT_(0xE691) volatile BYTE EP2BCL            ;  // Endpoint 2 Byte Count L
EXTERN xdata _AT_(0xE694) volatile BYTE EP4BCH            ;  // Endpoint 4 Byte Count H
EXTERN xdata _AT_(0xE695) volatile BYTE EP4BCL            ;  // Endpoint 4 Byte Count L
EXTERN xdata _AT_(0xE698) volatile BYTE EP6BCH            ;  // Endpoint 6 Byte Count H
EXTERN xdata _AT_(0xE699) volatile BYTE EP6BCL            ;  // Endpoint 6 Byte Count L
EXTERN xdata _AT_(0xE69C) volatile BYTE EP8BCH            ;  // Endpoint 8 Byte Count H
EXTERN xdata _AT_(0xE69D) volatile BYTE EP8BCL            ;  // Endpoint 8 Byte Count L
EXTERN xdata _AT_(0xE6A0) volatile BYTE EP0CS             ;  // Endpoint  Control and Status
EXTERN xdata _AT_(0xE6A1) volatile BYTE EP1OUTCS          ;  // Endpoint 1 OUT Control and Status
EXTERN xdata _AT_(0xE6A2) volatile BYTE EP1INCS           ;  // Endpoint 1 IN Control and Status
EXTERN xdata _AT_(0xE6A3) volatile BYTE EP2CS             ;  // Endpoint 2 Control and Status
EXTERN xdata _AT_(0xE6A4) volatile BYTE EP4CS             ;  // Endpoint 4 Control and Status
EXTERN xdata _AT_(0xE6A5) volatile BYTE EP6CS             ;  // Endpoint 6 Control and Status
EXTERN xdata _AT_(0xE6A6) volatile BYTE EP8CS             ;  // Endpoint 8 Control and Status
EXTERN xdata _AT_(0xE6A7) volatile BYTE EP2FIFOFLGS       ;  // Endpoint 2 Flags
EXTERN xdata _AT_(0xE6A8) volatile BYTE EP4FIFOFLGS       ;  // Endpoint 4 Flags
EXTERN xdata _AT_(0xE6A9) volatile BYTE EP6FIFOFLGS       ;  // Endpoint 6 Flags
EXTERN xdata _AT_(0xE6AA) volatile BYTE EP8FIFOFLGS       ;  // Endpoint 8 Flags
EXTERN xdata _AT_(0xE6AB) volatile BYTE EP2FIFOBCH        ;  // EP2 FIFO total byte count H
EXTERN xdata _AT_(0xE6AC) volatile BYTE EP2FIFOBCL        ;  // EP2 FIFO total byte count L
EXTERN xdata _AT_(0xE6AD) volatile BYTE EP4FIFOBCH        ;  // EP4 FIFO total byte count H
EXTERN xdata _AT_(0xE6AE) volatile BYTE EP4FIFOBCL        ;  // EP4 FIFO total byte count L
EXTERN xdata _AT_(0xE6AF) volatile BYTE EP6FIFOBCH        ;  // EP6 FIFO total byte count H
EXTERN xdata _AT_(0xE6B0) volatile BYTE EP6FIFOBCL        ;  // EP6 FIFO total byte count L
EXTERN xdata _AT_(0xE6B1) volatile BYTE EP8FIFOBCH        ;  // EP8 FIFO total byte count H
EXTERN xdata _AT_(0xE6B2) volatile BYTE EP8FIFOBCL        ;  // EP8 FIFO total byte count L
EXTERN xdata _AT_(0xE6B3) volatile BYTE SUDPTRH           ;  // Setup Data Pointer high address byte
EXTERN xdata _AT_(0xE6B4) volatile BYTE SUDPTRL           ;  // Setup Data Pointer low address byte
EXTERN xdata _AT_(0xE6B5) volatile BYTE SUDPTRCTL         ;  // Setup Data Pointer Auto Mode
EXTERN xdata _AT_(0xE6B8) volatile BYTE SETUPDAT[8]       ;  // 8 bytes of SETUP data

// GPIF

EXTERN xdata _AT_(0xE6C0) volatile BYTE GPIFWFSELECT      ;  // Waveform Selector
EXTERN xdata _AT_(0xE6C1) volatile BYTE GPIFIDLECS        ;  // GPIF Done, GPIF IDLE drive mode
EXTERN xdata _AT_(0xE6C2) volatile BYTE GPIFIDLECTL       ;  // Inactive Bus, CTL states
EXTERN xdata _AT_(0xE6C3) volatile BYTE GPIFCTLCFG        ;  // CTL OUT pin drive
EXTERN xdata _AT_(0xE6C4) volatile BYTE GPIFADRH          ;  // GPIF Address H
EXTERN xdata _AT_(0xE6C5) volatile BYTE GPIFADRL          ;  // GPIF Address L

EXTERN xdata _AT_(0xE6CE) volatile BYTE GPIFTCB3          ;  // GPIF Transaction Count Byte 3
EXTERN xdata _AT_(0xE6CF) volatile BYTE GPIFTCB2          ;  // GPIF Transaction Count Byte 2
EXTERN xdata _AT_(0xE6D0) volatile BYTE GPIFTCB1          ;  // GPIF Transaction Count Byte 1
EXTERN xdata _AT_(0xE6D1) volatile BYTE GPIFTCB0          ;  // GPIF Transaction Count Byte 0

#define EP2GPIFTCH GPIFTCB1   // these are here for backwards compatibility
#define EP2GPIFTCL GPIFTCB0   // before REVE silicon (ie. REVB and REVD)
#define EP4GPIFTCH GPIFTCB1   // these are here for backwards compatibility
#define EP4GPIFTCL GPIFTCB0   // before REVE silicon (ie. REVB and REVD)
#define EP6GPIFTCH GPIFTCB1   // these are here for backwards compatibility
#define EP6GPIFTCL GPIFTCB0   // before REVE silicon (ie. REVB and REVD)
#define EP8GPIFTCH GPIFTCB1   // these are here for backwards compatibility
#define EP8GPIFTCL GPIFTCB0   // before REVE silicon (ie. REVB and REVD)

// EXTERN xdata volatile BYTE EP2GPIFTCH     _AT_ 0xE6D0;  // EP2 GPIF Transaction Count High
// EXTERN xdata volatile BYTE EP2GPIFTCL     _AT_ 0xE6D1;  // EP2 GPIF Transaction Count Low
EXTERN xdata _AT_(0xE6D2) volatile BYTE EP2GPIFFLGSEL     ;  // EP2 GPIF Flag select
EXTERN xdata _AT_(0xE6D3) volatile BYTE EP2GPIFPFSTOP     ;  // Stop GPIF EP2 transaction on prog. flag
EXTERN xdata _AT_(0xE6D4) volatile BYTE EP2GPIFTRIG       ;  // EP2 FIFO Trigger
// EXTERN xdata volatile BYTE EP4GPIFTCH     _AT_ 0xE6D8;  // EP4 GPIF Transaction Count High
// EXTERN xdata volatile BYTE EP4GPIFTCL     _AT_ 0xE6D9;  // EP4 GPIF Transactionr Count Low
EXTERN xdata _AT_(0xE6DA) volatile BYTE EP4GPIFFLGSEL     ;  // EP4 GPIF Flag select
EXTERN xdata _AT_(0xE6DB) volatile BYTE EP4GPIFPFSTOP     ;  // Stop GPIF EP4 transaction on prog. flag
EXTERN xdata _AT_(0xE6DC) volatile BYTE EP4GPIFTRIG       ;  // EP4 FIFO Trigger
// EXTERN xdata volatile BYTE EP6GPIFTCH     _AT_ 0xE6E0;  // EP6 GPIF Transaction Count High
// EXTERN xdata volatile BYTE EP6GPIFTCL     _AT_ 0xE6E1;  // EP6 GPIF Transaction Count Low
EXTERN xdata _AT_(0xE6E2) volatile BYTE EP6GPIFFLGSEL     ;  // EP6 GPIF Flag select
EXTERN xdata _AT_(0xE6E3) volatile BYTE EP6GPIFPFSTOP     ;  // Stop GPIF EP6 transaction on prog. flag
EXTERN xdata _AT_(0xE6E4) volatile BYTE EP6GPIFTRIG       ;  // EP6 FIFO Trigger
// EXTERN xdata volatile BYTE EP8GPIFTCH     _AT_ 0xE6E8;  // EP8 GPIF Transaction Count High
// EXTERN xdata volatile BYTE EP8GPIFTCL     _AT_ 0xE6E9;  // EP8GPIF Transaction Count Low
EXTERN xdata _AT_(0xE6EA) volatile BYTE EP8GPIFFLGSEL     ;  // EP8 GPIF Flag select
EXTERN xdata _AT_(0xE6EB) volatile BYTE EP8GPIFPFSTOP     ;  // Stop GPIF EP8 transaction on prog. flag
EXTERN xdata _AT_(0xE6EC) volatile BYTE EP8GPIFTRIG       ;  // EP8 FIFO Trigger
EXTERN xdata _AT_(0xE6F0) volatile BYTE XGPIFSGLDATH      ;  // GPIF Data H (16-bit mode only)
EXTERN xdata _AT_(0xE6F1) volatile BYTE XGPIFSGLDATLX     ;  // Read/Write GPIF Data L & trigger transac
EXTERN xdata _AT_(0xE6F2) volatile BYTE XGPIFSGLDATLNOX   ;  // Read GPIF Data L, no transac trigger
EXTERN xdata _AT_(0xE6F3) volatile BYTE GPIFREADYCFG      ;  // Internal RDY,Sync/Async, RDY5CFG
EXTERN xdata _AT_(0xE6F4) volatile BYTE GPIFREADYSTAT     ;  // RDY pin states
EXTERN xdata _AT_(0xE6F5) volatile BYTE GPIFABORT         ;  // Abort GPIF cycles

// UDMA

EXTERN xdata _AT_(0xE6C6) volatile BYTE FLOWSTATE         ; //Defines GPIF flow state
EXTERN xdata _AT_(0xE6C7) volatile BYTE FLOWLOGIC         ; //Defines flow/hold decision criteria
EXTERN xdata _AT_(0xE6C8) volatile BYTE FLOWEQ0CTL        ; //CTL states during active flow state
EXTERN xdata _AT_(0xE6C9) volatile BYTE FLOWEQ1CTL        ; //CTL states during hold flow state
EXTERN xdata _AT_(0xE6CA) volatile BYTE FLOWHOLDOFF       ;
EXTERN xdata _AT_(0xE6CB) volatile BYTE FLOWSTB           ; //CTL/RDY Signal to use as master data strobe 
EXTERN xdata _AT_(0xE6CC) volatile BYTE FLOWSTBEDGE       ; //Defines active master strobe edge
EXTERN xdata _AT_(0xE6CD) volatile BYTE FLOWSTBHPERIOD    ; //Half Period of output master strobe
EXTERN xdata _AT_(0xE60C) volatile BYTE GPIFHOLDAMOUNT    ; //Data delay shift 
EXTERN xdata _AT_(0xE67D) volatile BYTE UDMACRCH          ; //CRC Upper byte
EXTERN xdata _AT_(0xE67E) volatile BYTE UDMACRCL          ; //CRC Lower byte
EXTERN xdata _AT_(0xE67F) volatile BYTE UDMACRCQUAL       ; //UDMA In only, host terminated use only


// Debug/Test

EXTERN xdata _AT_(0xE6F8) volatile BYTE DBUG              ;  // Debug
EXTERN xdata _AT_(0xE6F9) volatile BYTE TESTCFG           ;  // Test configuration
EXTERN xdata _AT_(0xE6FA) volatile BYTE USBTEST           ;  // USB Test Modes
EXTERN xdata _AT_(0xE6FB) volatile BYTE CT1               ;  // Chirp Test--Override
EXTERN xdata _AT_(0xE6FC) volatile BYTE CT2               ;  // Chirp Test--FSM
EXTERN xdata _AT_(0xE6FD) volatile BYTE CT3               ;  // Chirp Test--Control Signals
EXTERN xdata _AT_(0xE6FE) volatile BYTE CT4               ;  // Chirp Test--Inputs

// Endpoint Buffers

EXTERN xdata _AT_(0xE740) volatile BYTE EP0BUF[64]        ;  // EP0 IN-OUT buffer
EXTERN xdata _AT_(0xE780) volatile BYTE EP1OUTBUF[64]     ;  // EP1-OUT buffer
EXTERN xdata _AT_(0xE7C0) volatile BYTE EP1INBUF[64]      ;  // EP1-IN buffer
EXTERN xdata _AT_(0xF000) volatile BYTE EP2FIFOBUF[1024]  ;  // 512/1024-byte EP2 buffer (IN or OUT)
EXTERN xdata _AT_(0xF400) volatile BYTE EP4FIFOBUF[1024]  ;  // 512 byte EP4 buffer (IN or OUT)
EXTERN xdata _AT_(0xF800) volatile BYTE EP6FIFOBUF[1024]  ;  // 512/1024-byte EP6 buffer (IN or OUT)
EXTERN xdata _AT_(0xFC00) volatile BYTE EP8FIFOBUF[1024]  ;  // 512 byte EP8 buffer (IN or OUT)

#undef EXTERN
#undef _AT_

/*-----------------------------------------------------------------------------
   Special Function Registers (SFRs)
   The byte registers and bits defined in the following list are based
   on the Synopsis definition of the 8051 Special Function Registers for EZ-USB. 
    If you modify the register definitions below, please regenerate the file 
    "ezregs.inc" which includes the same basic information for assembly inclusion.
-----------------------------------------------------------------------------*/

sfr at 0x80 IOA ;
sfr at 0x81 SP  ;
sfr at 0x82 DPL ;
sfr at 0x83 DPH ;
sfr at 0x84 DPL1;
sfr at 0x85 DPH1;
sfr at 0x86 DPS ;
         /*  DPS  */
         // sbit SEL   = 0x86+0;
sfr at 0x87 PCON ;
	/*  PCON  */
         //sbit IDLE   = 0x87+0;
         //sbit STOP   = 0x87+1;
         //sbit GF0    = 0x87+2;
         //sbit GF1    = 0x87+3;
         //sbit SMOD0  = 0x87+7;
sfr at 0x88 TCON;
         /*  TCON  */
/*         sbit IT0    = 0x88+0;
         sbit IE0    = 0x88+1;
         sbit IT1    = 0x88+2;
         sbit IE1    = 0x88+3;
         sbit TR0    = 0x88+4;
         sbit TF0    = 0x88+5;
         sbit TR1    = 0x88+6;
         sbit TF1    = 0x88+7;*/
sfr at 0x89 TMOD;
         /*  TMOD  */
         //sbit M00    = 0x89+0;
         //sbit M10    = 0x89+1;
         //sbit CT0    = 0x89+2;
         //sbit GATE0  = 0x89+3;
         //sbit M01    = 0x89+4;
         //sbit M11    = 0x89+5;
         //sbit CT1    = 0x89+6;
         //sbit GATE1  = 0x89+7;
sfr at 0x8A TL0 ;
sfr at 0x8B TL1 ;
sfr at 0x8C TH0 ;
sfr at 0x8D TH1 ;
sfr at 0x8E CKCO;
         /*  CKCON  */
         //sbit MD0    = 0x89+0;
         //sbit MD1    = 0x89+1;
         //sbit MD2    = 0x89+2;
         //sbit T0M    = 0x89+3;
         //sbit T1M    = 0x89+4;
         //sbit T2M    = 0x89+5;
sfr at 0x8F SPC_; // Was WRS in Reg320
         /*  CKCON  */
         //sbit WRS    = 0x8F+0;
sfr at 0x90 IOB ;
sfr at 0x91 EXIF; // EXIF Bit Values differ from Reg320
         /*  EXIF  */
         //sbit USBINT = 0x91+4;
         //sbit I2CINT = 0x91+5;
         //sbit IE4    = 0x91+6;
         //sbit IE5    = 0x91+7;
sfr at 0x92 MPA;
sfr at 0x98 SCO;
         /*  SCON0  */
/*         sbit RI    = 0x98+0;
         sbit TI    = 0x98+1;
         sbit RB8   = 0x98+2;
         sbit TB8   = 0x98+3;
         sbit REN   = 0x98+4;
         sbit SM2   = 0x98+5;
         sbit SM1   = 0x98+6;
         sbit SM0   = 0x98+7;*/
sfr at 0x99 SBU;

sfr at 0x9A APTR1H ;
sfr at 0x9B APTR1L ;
sfr at 0x9C AUTODAT1; 
sfr at 0x9D AUTOPTRH2;
sfr at 0x9E AUTOPTRL2; 
sfr at 0x9F AUTODAT2;
sfr at 0xA0 IOC    ;
sfr at 0xA1 INT2CLR;
sfr at 0xA2 INT4CLR;

sfr at 0xA8 IE ;
         /*  IE  */
//          sbit EX0   = 0xA8+0;
//          sbit ET0   = 0xA8+1;
//          sbit EX1   = 0xA8+2;
//          sbit ET1   = 0xA8+3;
//          sbit ES0   = 0xA8+4;
//          sbit ET2   = 0xA8+5;
//          sbit ES1   = 0xA8+6;
//          sbit EA    = 0xA8+7;

sfr at 0xAA EP2468STAT;
         /* EP2468STAT */
         //sbit EP2E   = 0xAA+0;
         //sbit EP2F   = 0xAA+1;
         //sbit EP4E   = 0xAA+2;
         //sbit EP4F   = 0xAA+3;
         //sbit EP6E   = 0xAA+4;
         //sbit EP6F   = 0xAA+5;
         //sbit EP8E   = 0xAA+6;
         //sbit EP8F   = 0xAA+7;

sfr at 0xAB EP24FIFOFLGS;
sfr at 0xAC EP68FIFOFLGS;
sfr at 0xAF AUTOPTRSETUP;
            /* AUTOPTRSETUP */
//             sbit EXTACC  = 0xAF+0;
//             sbit APTR1FZ = 0xAF+1;
//             sbit APTR2FZ = 0xAF+2;

sfr at 0xB0 IOD ;
sfr at 0xB1 IOE ;
sfr at 0xB2 OEA ;
sfr at 0xB3 OEB ;
sfr at 0xB4 OEC ;
sfr at 0xB5 OED ;
sfr at 0xB6 OEE ;

sfr at 0xB8 IP ;
         /*  IP  */
//          sbit PX0   = 0xB8+0;
//          sbit PT0   = 0xB8+1;
//          sbit PX1   = 0xB8+2;
//          sbit PT1   = 0xB8+3;
//          sbit PS0   = 0xB8+4;
//          sbit PT2   = 0xB8+5;
//          sbit PS1   = 0xB8+6;

sfr at 0xBA EP01STAT;
sfr at 0xBB GPIFTRIG;
                
sfr at 0xBD GPIFSGLDATH;
sfr at 0xBE GPIFSGLDATLX;
sfr at 0xBF GPIFSGLDATLNOX;

sfr at 0xC0 SCON1;
         /*  SCON1  */
/*         sbit RI1   = 0xC0+0;
         sbit TI1   = 0xC0+1;
         sbit RB81  = 0xC0+2;
         sbit TB81  = 0xC0+3;
         sbit REN1  = 0xC0+4;
         sbit SM21  = 0xC0+5;
         sbit SM11  = 0xC0+6;
         sbit SM01  = 0xC0+7;*/
sfr at 0xC1 SBUF1;
sfr at 0xC8 T2CON;
         /*  T2CON  */
/*         sbit CP_RL2 = 0xC8+0;
         sbit C_T2  = 0xC8+1;
         sbit TR2   = 0xC8+2;
         sbit EXEN2 = 0xC8+3;
         sbit TCLK  = 0xC8+4;
         sbit RCLK  = 0xC8+5;
         sbit EXF2  = 0xC8+6;
         sbit TF2   = 0xC8+7;*/
sfr at 0xCA RCAP2L;
sfr at 0xCB RCAP2H;
sfr at 0xCC TL2;
sfr at 0xCD TH2;
sfr at 0xD0 PSW;
         /*  PSW  */
/*         sbit P     = 0xD0+0;
         sbit FL    = 0xD0+1;
         sbit OV    = 0xD0+2;
         sbit RS0   = 0xD0+3;
         sbit RS1   = 0xD0+4;
         sbit F0    = 0xD0+5;
         sbit AC    = 0xD0+6;
         sbit CY    = 0xD0+7;*/
sfr at 0xD8 EICON; // Was WDCON in DS80C320; Bit Values differ from Reg320
         /*  EICON  */
/*         sbit INT6  = 0xD8+3;
         sbit RESI  = 0xD8+4;
         sbit ERESI = 0xD8+5;
         sbit SMOD1 = 0xD8+7;*/
sfr at 0xE0 ACC;
sfr at 0xE8 EIE; // EIE Bit Values differ from Reg320
                        /*  EIE  */
/*         sbit EUSB    = 0xE8+0;
         sbit EI2C    = 0xE8+1;
         sbit EIEX4   = 0xE8+2;
         sbit EIEX5   = 0xE8+3;
         sbit EIEX6   = 0xE8+4;*/
sfr at 0xF0 B  ;
sfr at 0xF8 EIP; // EIP Bit Values differ from Reg320
                        /*  EIP  */
//          sbit PUSB    = 0xF8+0;
//          sbit PI2C    = 0xF8+1;
//          sbit EIPX4   = 0xF8+2;
//          sbit EIPX5   = 0xF8+3;
//          sbit EIPX6   = 0xF8+4;

/*-----------------------------------------------------------------------------
   Bit Masks
-----------------------------------------------------------------------------*/

#define bmBIT0	1
#define bmBIT1	2
#define bmBIT2	4
#define bmBIT3	8
#define bmBIT4	16
#define bmBIT5	32
#define bmBIT6	64
#define bmBIT7	128

/* CPU Control & Status Register (CPUCS) */
#define bmPRTCSTB    bmBIT5
#define bmCLKSPD     (bmBIT4 | bmBIT3)
#define bmCLKSPD1    bmBIT4
#define bmCLKSPD0    bmBIT3
#define bmCLKINV     bmBIT2
#define bmCLKOE      bmBIT1
#define bm8051RES    bmBIT0
/* Port Alternate Configuration Registers */
/* Port A (PORTACFG) */
#define bmFLAGD      bmBIT7
#define bmINT1       bmBIT1
#define bmINT0       bmBIT0
/* Port C (PORTCCFG) */
#define bmGPIFA7     bmBIT7
#define bmGPIFA6     bmBIT6
#define bmGPIFA5     bmBIT5
#define bmGPIFA4     bmBIT4
#define bmGPIFA3     bmBIT3
#define bmGPIFA2     bmBIT2
#define bmGPIFA1     bmBIT1
#define bmGPIFA0     bmBIT0
/* Port E (PORTECFG) */
#define bmGPIFA8     bmBIT7
#define bmT2EX       bmBIT6
#define bmINT6       bmBIT5
#define bmRXD1OUT    bmBIT4
#define bmRXD0OUT    bmBIT3
#define bmT2OUT      bmBIT2
#define bmT1OUT      bmBIT1
#define bmT0OUT      bmBIT0

/* I2C Control & Status Register (I2CS) */
#define bmSTART      bmBIT7
#define bmSTOP       bmBIT6
#define bmLASTRD     bmBIT5
#define bmID         (bmBIT4 | bmBIT3)
#define bmBERR       bmBIT2
#define bmACK        bmBIT1
#define bmDONE       bmBIT0
/* I2C Control Register (I2CTL) */
#define bmSTOPIE     bmBIT1
#define bm400KHZ     bmBIT0
/* Interrupt 2 (USB) Autovector Register (INT2IVEC) */
#define bmIV4        bmBIT6
#define bmIV3        bmBIT5
#define bmIV2        bmBIT4
#define bmIV1        bmBIT3
#define bmIV0        bmBIT2
/* USB Interrupt Request & Enable Registers (USBIE/USBIRQ) */
#define bmEP0ACK     bmBIT6
#define bmHSGRANT    bmBIT5
#define bmURES       bmBIT4
#define bmSUSP       bmBIT3
#define bmSUTOK      bmBIT2
#define bmSOF        bmBIT1
#define bmSUDAV      bmBIT0
/* Breakpoint register (BREAKPT) */
#define bmBREAK      bmBIT3
#define bmBPPULSE    bmBIT2
#define bmBPEN       bmBIT1
/* Interrupt 2 & 4 Setup (INTSETUP) */
#define bmAV2EN      bmBIT3
#define INT4IN       bmBIT1
#define bmAV4EN      bmBIT0
/* USB Control & Status Register (USBCS) */
#define bmHSM        bmBIT7
#define bmDISCON     bmBIT3
#define bmNOSYNSOF   bmBIT2
#define bmRENUM      bmBIT1
#define bmSIGRESUME  bmBIT0
/* Wakeup Control and Status Register (WAKEUPCS) */
#define bmWU2        bmBIT7
#define bmWU         bmBIT6
#define bmWU2POL     bmBIT5
#define bmWUPOL      bmBIT4
#define bmDPEN       bmBIT2
#define bmWU2EN      bmBIT1
#define bmWUEN       bmBIT0
/* End Point 0 Control & Status Register (EP0CS) */
#define bmHSNAK      bmBIT7
/* End Point 0-1 Control & Status Registers (EP0CS/EP1OUTCS/EP1INCS) */
#define bmEPBUSY     bmBIT1
#define bmEPSTALL    bmBIT0
/* End Point 2-8 Control & Status Registers (EP2CS/EP4CS/EP6CS/EP8CS) */
#define bmNPAK       (bmBIT6 | bmBIT5 | bmBIT4)
#define bmEPFULL     bmBIT3
#define bmEPEMPTY    bmBIT2
/* Endpoint Status (EP2468STAT) SFR bits */
#define bmEP8FULL    bmBIT7
#define bmEP8EMPTY   bmBIT6
#define bmEP6FULL    bmBIT5
#define bmEP6EMPTY   bmBIT4
#define bmEP4FULL    bmBIT3
#define bmEP4EMPTY   bmBIT2
#define bmEP2FULL    bmBIT1
#define bmEP2EMPTY   bmBIT0
/* SETUP Data Pointer Auto Mode (SUDPTRCTL) */
#define bmSDPAUTO    bmBIT0
/* Endpoint Data Toggle Control (TOGCTL) */
#define bmQUERYTOGGLE  bmBIT7
#define bmSETTOGGLE    bmBIT6
#define bmRESETTOGGLE  bmBIT5
#define bmTOGCTLEPMASK bmBIT3 | bmBIT2 | bmBIT1 | bmBIT0
/* IBN (In Bulk Nak) enable and request bits (IBNIE/IBNIRQ) */
#define bmEP8IBN     bmBIT5
#define bmEP6IBN     bmBIT4
#define bmEP4IBN     bmBIT3
#define bmEP2IBN     bmBIT2
#define bmEP1IBN     bmBIT1
#define bmEP0IBN     bmBIT0

/* PING-NAK enable and request bits (NAKIE/NAKIRQ) */
#define bmEP8PING     bmBIT7
#define bmEP6PING     bmBIT6
#define bmEP4PING     bmBIT5
#define bmEP2PING     bmBIT4
#define bmEP1PING     bmBIT3
#define bmEP0PING     bmBIT2
#define bmIBN         bmBIT0

/* Interface Configuration bits (IFCONFIG) */
#define bmIFCLKSRC    bmBIT7
#define bm3048MHZ     bmBIT6
#define bmIFCLKOE     bmBIT5
#define bmIFCLKPOL    bmBIT4
#define bmASYNC       bmBIT3
#define bmGSTATE      bmBIT2
#define bmIFCFG1      bmBIT1
#define bmIFCFG0      bmBIT0
#define bmIFCFGMASK   (bmIFCFG0 | bmIFCFG1)
#define bmIFGPIF      bmIFCFG1

/* EP 2468 FIFO Configuration bits (EP2FIFOCFG,EP4FIFOCFG,EP6FIFOCFG,EP8FIFOCFG) */
#define bmINFM       bmBIT6
#define bmOEP        bmBIT5
#define bmAUTOOUT    bmBIT4
#define bmAUTOIN     bmBIT3
#define bmZEROLENIN  bmBIT2
#define bmWORDWIDE   bmBIT0

/* Chip Revision Control Bits (REVCTL) - used to ebable/disable revision specidic
   features */ 
#define bmNOAUTOARM    bmBIT1
#define bmSKIPCOMMIT   bmBIT0

/* Fifo Reset bits (FIFORESET) */
#define bmNAKALL       bmBIT7

#endif   /* FX2REGS_H */
